Επισημαίνω:
Waterproof Coating Acrylic Emulsion
, High Coverage Efficiency Acrylic Emulsion
εμφάνιση: |
Γαλακτώδες λευκό υγρό (γίνεται διαφανές/ελαστικό φιλμ μετά το στέγνωμα) |
Τύπος ρητίνης: |
ακρυλικό γαλάκτωμα |
Πυκνότητα: |
1,02 – 1,30 g/cm³ |
στερεό περιεχόμενο: |
50 – 75% |
Ιξώδες (25℃): |
500 – 3000 mPa·s |
Τιμή Ph: |
6,5 – 9,0 |
Αντοχή εφελκυσμού: |
≥1,0 – 1,8 MPa |
Επιμήκυνση στο Break: |
≥200% (μπορεί να φτάσει το 300–1000%) |
Δύναμη δακρύων: |
≥10 kgf/cm |
Δύναμη προσκόλλησης: |
0,5 – 1,3 MPa |
Ατελή νερού: |
0,3 MPa, χωρίς διαρροή νερού για 30 λεπτά |
Ευελιξία σε χαμηλή θερμοκρασία: |
Χωρίς ρωγμές στους -10℃ |
Περιεχόμενο Voc: |
≤50 (φιλικό προς το περιβάλλον) |
Χρόνος στεγνώματος επιφάνειας: |
2 – 4 ώρες |
Πλήρως θεραπευμένη: |
8 – 24 ώρες |
Θερμοκρασία εφαρμογής: |
5 – 40℃ |
Θερμοκρασία υπηρεσίας: |
-10 – 80℃ |
Αντίσταση UV: |
Εξαιρετικό, χωρίς ρωγμές |
Αντοχή στις καιρικές συνθήκες: |
Εξαιρετική απόδοση και μακροχρόνια σταθερότητα σε εξωτερικούς χώρους |
Κάλυψη: |
1 – 2 kg/m² |
Διάρκεια ζωής: |
12-15 μηνών |
Τόπος καταγωγής: |
Shandong, Κίνα |
Μάρκα: |
ΚΑΠ |
Acrylic Emulsion Waterproofing Product Introduction
Jiurunfa Acrylic Emulsion Waterproof Coating is a high-performance water-based coating designed to provide durable and flexible waterproof protection. Formulated using advanced acrylic polymer technology, it cures to form a seamless, elastic waterproof membrane that effectively seals cracks and prevents moisture penetration into various substrates.
Jiurunfa Acrylic Emulsion Waterproof Coating is environmentally friendly, with low VOC content and contains no harmful solvents, meeting modern green building standards. It is easy to apply, can be brushed, rolled, or sprayed, dries quickly, and forms a highly efficient film, contributing to improved construction efficiency.
Acrylic Emulsion Waterproofing Product Specifications
| Item |
Typical Value |
| Appearance |
Milky white liquid (becomes transparent/elastic film after drying) |
| Resin Type |
Acrylic Emulsion |
| Density |
1.02 – 1.30 g/cm³ |
| Solid Content |
50 – 75% |
| Viscosity (25℃) |
500 – 3000 mPa·s |
| pH Value |
6.5 – 9.0 |
| Tensile Strength |
≥1.0 – 1.8 MPa |
| Elongation at Break |
≥200% (can reach 300–1000%) |
| Tear Strength |
≥10 kgf/cm |
| Adhesion Strength |
0.5 – 1.3 MPa |
| Water Impermeability |
0.3MPa, no water leakage for 30 minutes |
| Low Temp Flexibility |
No cracks at -10℃ |
| VOC Content |
≤50 (Environmentally friendly) |
| Surface Dry Time |
2 – 4 hours |
| Fully Cured |
8 – 24 hours |
| Application Temp |
5 – 40℃ |
| Service Temp |
-10 – 80℃ |
| UV Resistance |
Excellent, no cracks |
| Weather Resistance |
Excellent performance and long-term outdoor stability |
| Coverage |
1 – 2 kg/m² |
| Shelf Life |
12-15 months |
Acrylic Emulsion Waterproofing Product Features
Acrylic Emulsion Waterproofing is a high-performance water-based coating that forms a seamless and durable waterproof membrane to effectively prevent water penetration and leakage. With excellent elasticity and crack-bridging ability, it adapts to structural movement without failure, while its strong adhesion ensures long-term bonding on concrete, cement, and other substrates. The product features outstanding weather and UV resistance, fast drying for efficient application, and a low VOC eco-friendly formulation suitable for both indoor and outdoor use. Its high solid content provides better coverage and cost efficiency, making it an ideal solution for roofs, bathrooms, basements, balconies, and exterior wall waterproofing.
Acrylic Emulsion Waterproofing Product Case Study
A city road sidewalk waterproofing repair project was underway. Water seepage through the gaps in the sidewalk tiles caused softening of the roadbed and loosening of the tiles, affecting pedestrian safety. The project required rapid construction without disrupting traffic. Our Acrylic Emulsion Waterproofing product is easy to apply; it can be directly applied to the tile gaps and the base layer, forming a film quickly with strong adhesion. It effectively blocks rainwater penetration, and after curing, it is wear-resistant and resistant to foot traffic. During construction, only a temporary area needs to be sealed. The project is quick and efficient, and after repair, the sidewalk is free of standing water, the tiles are firmly fixed, and pedestrian safety is improved.
About Us
We are a professional manufacturer of Acrylic Emulsion Waterproofing materials, specializing in the production of high-quality, eco-friendly waterproof solutions. With advanced production equipment and strict quality control, we ensure stable performance and reliable products. Our products are widely used in construction and infrastructure projects and are exported to multiple countries. We are committed to providing competitive pricing, consistent quality, and dependable service to our global customers.
Το μήνυμά σας πρέπει να αποτελείται από 20-3.000 χαρακτήρες!
