Resaltar:
Acrylic Emulsion Waterproofing Strong Bonding
, Strong Bonding Acrylic Emulsion
apariencia: |
Líquido blanco lechoso (se vuelve transparente/película elástica después del secado) |
Tipo de resina: |
emulsión de acrílico |
Densidad: |
1,02 – 1,30 g/cm³ |
contenido sólido: |
50 – 75% |
Viscosidad (25℃): |
500 – 3000 mPa·s |
Valor de Ph: |
6,5 – 9,0 |
Resistencia a la tracción: |
≥1,0 – 1,8MPa |
Alargamiento en rotura: |
≥200% (puede alcanzar 300-1000%) |
Resistencia al desgarro: |
≥10 kgf/cm |
Resistencia a la adhesión: |
0,5 – 1,3 MPa |
Impermenabilidad de agua: |
0,3 MPa, sin fugas de agua durante 30 minutos |
Flexibilidad a baja temperatura: |
Sin grietas a -10 ℃ |
Contenido de voz: |
≤50 (respetuoso con el medio ambiente) |
Tiempo de secado superficial: |
2 – 4 horas |
Completamente curado: |
8 – 24 horas |
Temperatura de aplicación: |
5 – 40 ℃ |
Temperatura de servicio: |
-10 – 80℃ |
Resistencia a los rayos ultravioleta: |
Excelente, sin grietas |
Resistencia a la intemperie: |
Excelente rendimiento y estabilidad en exteriores a largo plazo |
Cobertura: |
1 – 2 kg/m² |
Duración: |
12-15 meses |
Acrylic Emulsion Waterproofing Product Introduction
Jiurunfa Acrylic Emulsion Waterproof Coating is a high-performance water-based coating designed to provide durable and flexible waterproof protection. Formulated using advanced acrylic polymer technology, it cures to form a seamless, elastic waterproof membrane that effectively seals cracks and prevents moisture penetration into various substrates.
Jiurunfa Acrylic Emulsion Waterproof Coating is environmentally friendly, with low VOC content and contains no harmful solvents, meeting modern green building standards. It is easy to apply, can be brushed, rolled, or sprayed, dries quickly, and forms a highly efficient film, contributing to improved construction efficiency.
Acrylic Emulsion Waterproofing Product Specifications
| Item |
Typical Value |
| Appearance |
Milky white liquid (becomes transparent/elastic film after drying) |
| Resin Type |
Acrylic Emulsion |
| Density |
1.02 – 1.30 g/cm³ |
| Solid Content |
50 – 75% |
| Viscosity (25℃) |
500 – 3000 mPa·s |
| pH Value |
6.5 – 9.0 |
| Tensile Strength |
≥1.0 – 1.8 MPa |
| Elongation at Break |
≥200% (can reach 300–1000%) |
| Tear Strength |
≥10 kgf/cm |
| Adhesion Strength |
0.5 – 1.3 MPa |
| Water Impermeability |
0.3MPa, no water leakage for 30 minutes |
| Low Temp Flexibility |
No cracks at -10℃ |
| VOC Content |
≤50 (Environmentally friendly) |
| Surface Dry Time |
2 – 4 hours |
| Fully Cured |
8 – 24 hours |
| Application Temp |
5 – 40℃ |
| Service Temp |
-10 – 80℃ |
| UV Resistance |
Excellent, no cracks |
| Weather Resistance |
Excellent performance and long-term outdoor stability |
| Coverage |
1 – 2 kg/m² |
| Shelf Life |
12-15 months |
Acrylic Emulsion Waterproofing Product Features
Acrylic Emulsion Waterproofing is a high-performance water-based coating that forms a seamless and durable waterproof membrane to effectively prevent water penetration and leakage. With excellent elasticity and crack-bridging ability, it adapts to structural movement without failure, while its strong adhesion ensures long-term bonding on concrete, cement, and other substrates. The product features outstanding weather and UV resistance, fast drying for efficient application, and a low VOC eco-friendly formulation suitable for both indoor and outdoor use. Its high solid content provides better coverage and cost efficiency, making it an ideal solution for roofs, bathrooms, basements, balconies, and exterior wall waterproofing.
Acrylic Emulsion Waterproofing Product Case Study
A subway station's three underground waterproofing layers, with a maximum burial depth of 28 meters, faced significant seasonal fluctuations in groundwater levels and substantial structural settlement. Traditional waterproofing materials were unable to adapt to structural deformation and high water pressure requirements. Our Acrylic Emulsion Waterproofing product, combined with a grouting composite waterproofing solution, was adopted. The product can withstand 0.8MPa hydrostatic pressure, has an elongation at break of ≥800%, adapts to structural settlement and deformation, and possesses self-healing properties, allowing even minor cracks to repair themselves. After three years of operation and multiple heavy rainfalls, the waterproofing system remains intact.
About Us
We are a professional manufacturer of Acrylic Emulsion Waterproofing materials, specializing in the production of high-quality, eco-friendly waterproof solutions. With advanced production equipment and strict quality control, we ensure stable performance and reliable products. Our products are widely used in construction and infrastructure projects and are exported to multiple countries. We are committed to providing competitive pricing, consistent quality, and dependable service to our global customers.
¡Su mensaje debe tener entre 20 y 3.000 caracteres!
